Gypsum block machine
Gypsum Block Introduction:
Gypsum is the main raw material of gypsum block, after mixing with water, then pour the slurry into shaper, after drying and then make light of the building gypsum products. You also can add the lightweight aggregate, fiber reinforced materials, foam and other supporting material in the production according to the performance requirements.
1. Normally specification of the gypsum block
500 mm × 666mm ×60mm
500 mm × 666mm × 80mm
500 mm × 666mm × 100mm (solid, hollow) Hollow rate: 32%
2:Gypsum Block production line Capacity List
Capacity/M2/year | Specification /mm | Shaping Number/piece/time | Shaping time/hour |
length | heigh | thickness |
100,000 | 666mm | 500mm | 80-230mm | 8 | 57 |
120,000 | 10 | 57 |
150,000 | 12 | 57 |
200,000 | 16 | 57 |
250,000 | 18 | 57 |
300,000 | 21 | 57 |
350,000 | 24 | 57 |
3:Gypsum block production line description:
It adopts PLC control system. It can control the feeding machine, batching system, blender, molding machine, the central hydraulic station, pneumatic telescopic fixture, and other equipment according to the production requirements, it can guarantee the product quality and production efficiency.
Gypsum blocks production line consists of batch system, blending machine, forming machine, central hydraulic section, holding unit, machinery clamp and PLC controller .It adopts international advanced technology of hydraulic top rising of vertical mold forming and PLC controller . The gypsum blocks forming is being realized by full-automation, high-quality and accuracy . Our company makes forming machinery for gypsum blocks of both hollow and solid
1.Measuring system
Consisting of water metering device, powder metering device, compressed air systems and chassis and other components.
2. Mixer
Consisting of the mixer rack, stainless steel mixing tank, stainless steel openable top cover, the water pipe installed on the roof, stirrer and pouring cylinder which are equiped with with motor, etc.
3. Forming machine
The mold material adopts alloy steel that is electroplated with thick enough hard chrome on its surface and is mirror-polished. Then with high manufacturing accuracy and a fine adjustment structure of block dimensions to make sure all the blocks produced are of high precision, excellent surface finish, and also long life-span of the mold.
4. Central hydraulic station
Including high and low pressure oil pump and drive motor, fuel tank (with oiler, liquid level indicator, hook, etc.), electromagnetic valve, one-way throttle valve,etc.
5. Pneumatic flexible fixture
Pneumatic flexible fixture-on-rails: install fixturing trolley with wheels on two rails. The trolley can move at high or low speed, advance and retreat, and has the functions of brake positioning.
6. Automatic control system
The system uses programmable logic controller (PLC), and is composed of a button box, an electric control cabinet and other devices near the operators.
Gypsum block machine
